Christmas Card Holder - Altered Project

I've been working on this project for the past week and half and am now ready to share this fun project with you.  These card holders were inspired from a Holiday Cards & More magazine published by Papercrafts a couple years ago.  I've been searching for the holder so I could make my own and as luck would have it Hobby Lobby delivered a sale email to my inbox that just happened to have them featured!!!  You might be able to find them in the store but since the closest one to me is an hour away ordering them online was well worth the shipping costs.

So I started my project with this........



And after a couple coats of white acyrlic paint, I had this.....


After the inside and sides were dried, I turned the caddy upside down and painted the underneath.  Once that was dry I took them outside and sprayed them down with a sealant to help protect the paint.

The next step was finding the right papers for each of my caddies.  Once selected I measured the rectangular sides, cut the needed sizes and then traced the two ends onto the left over paper.  In all one 12" x 12" sheet of paper was all that was needed.  After inking the edges of the paper I used Scotch quick dry adhesive, I glued my papers in place, carefully trimmed any excess and then lightly sanded all edges.


Now for the fun.  Deciding what cuts I want to use to embellish my caddies!  I wanted to use cuts that would enhance the papers used.  While some were easy choices, others were not as easy as I anticipated.

All caddies of course have the same folder.  I cut these from Grapically Speaking and repurposed an actual manilla folder for the job.  After cutting the folders I ran each one through the printer and used the Christmas card font from dafont.com.

I then used the following cuts between the four caddies:

Teddy Bear Parade - Elf Teddy Bear (pictured above)

Christmas Solutions - Santa (after several attempts to cut his glasses I gave up)



Create a Critter 2 - Snowman



Christmas Cheer - Candies and Stocking



Oh, and that card you see in my caddy - here it is in full view.



I originally cut this little bear out for one of my caddies but with the antlers he was too tall.  So I combined him with this tree cut from one of my Sizzix dies.

I hope you enjoyed seeing my project and if you make some I'd love to see what you did so come back and tell me about it.....

2 comments:

Karons Krafty Korner said...

These are amazing - what a wonderful idea and could be reused every year - would even look wonderful under the Christmas tree:-)

~ Jo ~ said...

These are just gorgeous!!! I only wish I could find me a couple of those caddies!! Love these!

Hugs,
Jo